After all of my car rustoration metal work and welding this winter, I managed to eek out a few fabrication skills and I knew I would need them for the things I wanted to add to the front storage area of the trailer itself. I did the research on what I could buy to fit that “A” shaped area and I figured it was going to cost another $500 bucks, So I decided to build what I wanted myself. The first thing I did was spec out the cooler and I ended up with two of them (32 cans, 25 Quart) Iggloo Marine Coolers and tie downs. I figured I could fab up a bracket and mount the tie down system, they are just 11 inches in depth, so they fit perfect. So tonight I fabricated the bracket out of 3/4 inch steel, square tube, welded it all up and measured it in. I have to clean up my welds, drill and tap all the brackets holes and then mount it on the trailer. The fit is cool and it will look great.